Welcome Guest - Sign Up today
Welcome Guest - Sign Up today

Announcement

Collapse
No announcement yet.

Trim tilt manual screw release issue

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Trim tilt manual screw release issue

    Here's the jist of it. Power trim motor made sound but did not tilt. Manual release screw was jammed but finally got it free. Now that I have tried to turn it back to power it still moves freely. I did fully unscrew for manual and set all the way in for power. Did I mess up that part by doing so?

    Also in order to replace the t/t motor do I have to remove the bracket and if so any tips to make it easy. Shop said that it could just be a bad t/t motor.

  • #2
    Sign up today
    I think I figured out its a 1/4 turn valve, I saw a picture of the valve it self. Going to try that method.

    Comment

    Working...
    X